Maintenance - GoPro MAX User Manual

Removing the Door
REATTACHING THE DOOR
1. Line the door up with the small silver bar.
2. Press the door into small silver bar until it snaps into place.
74

Maintenance

Follow these guidelines to get the best performance from your camera:
• Always use the Lens Caps to protect your camera's lenses when
not in use. The lenses are exposed to capture spherical content and
are unprotected. Scratches to the lenses are not covered under
the warranty.
• To protect the lenses from damage, do not rest MAX on its front or
back side. Be sure the lenses are not resting against any surface.
• To clean the lenses, wipe them with a soft, lint-free cloth. If debris
becomes lodged between the lens and the trim ring, flush it out
with water or air. Do not insert foreign objects around the lens.
• The camera is waterproof to 16ft (5m)—no housing needed.
Ensure that the doors are closed before using the camera in or
around water, dirt, or sand.
• Before closing the doors, be sure the seals are free of debris. If
needed, clean with a cloth.
• Before opening the doors, be sure the camera is free of water or
debris. If needed, rinse the camera with fresh water and dry it with
a cloth.
• If sand or debris hardens around the doors, soak the camera in
warm tap water for 15 minutes and then rinse thoroughly to remove
the debris before opening the doors.
• For best audio performance, shake the camera or blow on the
mics to remove water and debris from the microphone holes. To
75