Hitachi BD-W80PAE Operating & Installation Instructions Manual page 23

Removing the Removing the
transport bolts transport bolts
s s
Hose and cable Hose and cable
length length
c c
d d
How to Install the Washing Machine How to Install the Washing Machine
■ ■
Remove the four transport bolts and insert the cover caps using the Remove the four transport bolts and insert the cover caps using the
packed-in 13 mm box spanner. packed-in 13 mm box spanner.
■ ■
The transport bolts must always be removed before using the washing The transport bolts must always be removed before using the washing
machine for the fi rst time and must be retained for any subsequent machine for the fi rst time and must be retained for any subsequent
transport (e.g. when moving). transport (e.g. when moving).
Do not remove these hose holders. Do not remove these hose holders.
● ●
Connection on the left side Connection on the left side
● ●
Optimum Water Pressure : Optimum Water Pressure :
(30kpa ~ 800kpa) (30kpa ~ 800kpa)
● ●
Use cold water from the tap Use cold water from the tap
Water Supply Hose Water Supply Hose
● ● Connection on the right side Connection on the right side
Power Supply Power Supply
(220-240V 50Hz) (220-240V 50Hz)
Power Cord Power Cord
Remove the Remove the
transport bolts transport bolts
Water Drain Hose (Approx. 105 cm) Water Drain Hose (Approx. 105 cm)
Water Drain Hose (Approx. 160 cm) Water Drain Hose (Approx. 160 cm)
Insert the Insert the
cover caps cover caps
Power Supply Power Supply
(220-240V 50Hz) (220-240V 50Hz)
Power Cord Power Cord
Water Supply Hose Water Supply Hose
23 23
3WPL079591-2 3WPL079591-2