Installation - Sony CPD-101VS Operating Instructions Manual

Installation

Step 1: Connect the computer
p
With the computer switched off, connect the video signal cable to the
display (VGA) connector on your computer. If your computer supports
the DDC plug-and-play standard, this connection will enable DDC
communication between the display and the computer.
The video signal cable is combined with audio and microphone cables.
If your computer is equipped with sound capability, connect the audio
(green) and microphone (red) plugs to appropriate jacks located on your
computer.
Blue (to monitor
connector)
Green (to LINE OUT
connector)
Red (to microphone
connector)
Note on handling the video signal cable
Do not touch the pins of the video signal cable.
12
Getting Started
2
PRINTER
AL MONITOR
LINE OUT LINE IN
USB
CONTR
MIC
Fasten the
screw of the
blue plug.
Computer