Casio pmn User Manual page 73

Appendix
Problem
The projector does not
project any image from the
connected device.
The projector does not
correctly project the image
from the connected device.
When RGB/Component is
selected as the input
source, the color of the
projected image or the
image itself is abnormal.
The projector keys to not
work.
Cause and Recommended Action
The connected computer or video device may not
be turned on, or it may not be outputting a video
signal.
Make sure the connected computer or video
device is turned on, and perform the required
operation on it to output a video signal.
The correct output source is not selected on the
projector.
On the projector, select the input source that
corresponds to the device whose image you
are trying to project.
Images may not project correctly when you have
the component output terminal of a video device
connected to the RGB terminal of the projector.
Try using the projector's VIDEO input terminal
or S-VIDEO input terminal (see "Connecting to
a Standard Video Device").
Images sent from a computer over an RGB cable
may not project correctly if [Component] is
selected for the "Input Settings
menu setting.
Turn off the projector and disconnect the AC
cord and RGB cable. Next, reconnect the AC
cord only and turn on power. Change the
"Input Settings
[RGB]. Try projecting again.
The settings configured on the setup menu's
"Input Settings RGB Input" menu may not be
compatible with the device connected to the RGB
input terminal.
Use the setup menu to configure the "Input
Settings RGB Input" menu settings to correct
the problem.
Key lock or power on password may be turned
on.
Turn off key lock and/or power on password.
73
RGB Input"
RGB Input" menu setting to
See
—
page 6
User's
Guide
(Basic
Operation)
page 42
page 42
page 47