System Board; Removing The System Board - Dell OptiPlex 3000 Thin Client Service Manual

Next steps
1. Install the WLAN card.
2. Install the side cover.
3. Follow the procedure in

System board

Removing the system board

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the speaker .
4. Remove the solid-state drive
5. Remove the memory .
6. Remove the WLAN card.
7. Remove the heat sink.
About this task
The following image indicates the connectors on your system board.
1. Speaker cable
3. Optional video connector (HDMI/VGA/DP port)
5. Optional PS/2 keyboard/mouse module connector
7. WLAN card connector
42 Removing and installing components
after working inside your
before working inside your
assembly.
computer.
computer.
2. Coin-cell battery
4. Optional I/O cable connector (USB 3.2 Gen 1 Type-C port
with DisplayPort Alt mode)
6. Memory module slots
8. M.2 2230 solid-state drive connector