Introduction; Ce Marking - Honeywell NOTIFIER IDR-M Installation And Commissioning Manual

IDR-M Mimic Installation & Commissioning Manual
1
1

Introduction

This manual provides the user with all
recommended procedural descriptions and full
technical details for the successful installation,
commissioning, configuration and operation of
an IDR-M mimic.
Procedures described in this manual include
appropriate warnings and cautions to guide the
user towards adopting safe and methodical
work practices during the installation and
commissioning phases.
Important Note
This manual must be read, and its content
clearly understood, before proceeding with
any work relating to the IDR-M mimic.
Damage to the mimic display and/or the fire
control panel(s) may result from NOT
following the recommended procedures
described in this manual.
If there are any areas of doubt, consult your
supplier before continuing with the system
installation, commissioning or configuration.

1.1 CE Marking

The IDR-M mimic is CE Marked to show that
it conforms to the requirements of the following
European Community Directives:
Electromagnetic Compatibility Directive 89/
336/EEC (and the amending Directives
92/31/EEC and 93/68/EEC).
997-412-000-3, Issue 3
June 2005