Cleaning And Sterilising - Philips AVENT SCF330 Manual

ENGLISH
10
2 Heat the bottle or storage cup with defrosted or refrigerated breast milk in a bowl of hot water
or in a bottle warmer.
3 Remove the screw ring and sealing disc from the bottle or remove the lid from the storage cup.
4 If you are using a storage cup, screw the adapter ring onto the cup.
5 Screw a sterilised screw ring with sterilised teat onto the bottle or onto the storage cup with
adapter ring.
Do's
Always check the temperature of the milk before you feed it to your baby.
Always discard any breast milk that is left over at the end of a feed.
Don'ts
Never heat milk in a microwave, as this can cause uneven heating, which can lead to hot spots in
the milk. It may also destroy nutrients in the milk.
pour it into the storage cup.

Cleaning and sterilising

subsequent use and sterilise all parts before each subsequent use.
1 Disassemble the breast pump completely. Also remove the white valve.
Be careful when you remove the white valve and when you clean it. If it gets damaged, your
breast pump does not function properly. To remove the white valve, gently pull at the ribbed tab
on the side of the valve.
2 Clean all parts in hot water with some mild washing-up liquid and then rinse them
thoroughly. You can also clean the parts in the dishwasher (on the top rack only).
liquid. Do not insert objects into the valve, as this may cause damage.
3 Sterilise all parts in a Philips AVENT steam steriliser or by boiling them for 5 minutes.
Storage
Keep the breast pump out of direct sunlight as prolonged exposure may cause discolouration.
1 Store the breast pump and its accessories in a safe and dry place.
The Philips AVENT manual breast pump is compatible with Philips AVENT bottles in our range.
use the same type of teat that was supplied with that bottle. For details on how to assemble the
teat and general cleaning instructions, refer to the user manual that came with your bottle. These
details can also be found on our website, www.philips.com/support.