Cleaning And Sterilising; Assembling - Philips AVENT SCF363/11 User Manual

3 Cleaning and
sterilising
Before you use your breast pump for the
first time and for every time, you must
disassemble, wash, and sterilise all the
breast pump parts that come into contact
with your breast milk. (see c , d , e , f ,
g in Overview chapter)
Before you use the bottle and its parts for
the first time and for every time,you must
also disassemble, wash and sterilise. (see
h , i , j in Overview chapter)
Caution
Never wash or sterilise the pump
•
motor, the silicone tube, the cap, and
the power adapter. These components
do not come into contact with your
breast milk. You can wipe those parts
clean with a soft cloth.
You can also use the dishwasher (top rack
only) or hand wash in warm, soapy water,
and then rinse thoroughly. We recommend
you to sterilise all the parts contacting
with breast milk in our Philips Avent steam
steriliser, or by boiling for 5 minutes.
Avoid to contact with the vessel directly to
protect the parts from deformation.
Caution
Take care when cleaning the valve
•
and the silicone diaphragm. If it gets
damaged, your breast pump will not
function properly.
To clean the valve, rub it gently
•
between your fingers in warm soapy
water. Do not insert any object as it
may cause damage.

4 Assembling

To assemble the pump, follow the steps
below.
Make sure that you clean and sterilise
•
the pump as instructed in this user
manual.
Make sure that you assemble the pump
•
correctly as instructed in this user
manual.
To avoid leakage, remove the residue
•
around the rim before assembling. Put
the bottle onto the pump body, and do
not over-tighten.
Wash your hand thoroughly before you
•
take the sterilised components.
1 Insert the valve into the pump body
from underneath.
2 Put the bottle onto the pump body
and turn it anticlockwise to fix it. Do
not over-tighten when assembling the
bottle to the pump body.
- 8 -
Note
1
2