NEC SL2100 Hardware Manual page 165

ISSUE 4.0
6.5.1 Connecting the Base Station
Figure 2-172 Base Station Front and Back View
Front View
If your network connection does not provide Power Over Ethernet, you will need to order a base station
AC adapter and a standard Ethernet-to-PoE adapter. Contact Customer Service.
Follow the steps below to connect the base station.
1. Connect a standard Ethernet cable (Cat 5 or higher) to the Ethernet/PoE jack on the rear of the
base station.
INSTALLING WIRELESS DECT TELEPHONES
Figure 2-172 Base Station Front and Back View
provides a front and rear view of the base station.
Rear View
SL2100
163