Installing the unit
Installation of the indoor unit
The indoor unit should be installed indoors and meet the following conditions .
f Installation site should be sheltered from frost .
f
f In area with suitable space for servicing .
f
f A place with adequate ventilation .
f
f Where there is no risk of leakage of flammable gases .
f
f There is a provision for condensate drain and pressure relief valve blow-off .
f
f The wall for installation is a flat, vertical and non-combustible wall, capable of supporting the operation weight of the
f
unit .
Installation space
f Ensure to leave the appropriate space as indicated in the drawing .
f
f Installation site should be secured with adequate ventilation so that the components of hydro unit will not be damaged
f
from overheating .
(Unit : mm )
ENGLISH-19