Installing The Unit; Outdoor Unit Installation; Outdoor Unit Support - Samsung HHSM-G500005-1 Installation Manual

OUTDOOR UNIT INSTALLATION

The outdoor unit must be installed on a rigid and stable base to avoid any increase in
the noise level and vibration. Particularly if the outdoor unit is to be installed in a location
exposed to strong or at a height, the unit must be fixed to an appropiate support (wall or
ground).
FIX THE OUTDOOR UNIT WITH ANCHOR
The anchor bolt must be 20mm or higher from the base.

OUTDOOR UNIT SUPPORT

• Ensure the wall will be able to suspend the weight of rack and outdoor unit;
• Install the rack close to the column as much as possible;
• Install proper grommet in order to reduce noise and residual vibration transferred
by outdoor unit towards wall.
Anchor Bolt
• The anchor bolt must be 20mm or higher from the base surface.
• When tightening the anchor bolt, tighten the rubber washer to prevent outdoor
unit bolt connection part from corroding.
• Make a drain outlet around the base for outdoor unit drainage.
• If the outdoor unit is installed on the roof, you have to check the celing strength
and waterproof the unit.
When installing Air Guide Duct
• Check and make sure that screws do not damage the copper pipe.
• Secure air guide duct on guard fan,
620mm
940mm

Installing The Unit

15