OTHER RECORDING FUNCTIONS
Using Manual Focus
With the Manual Focus mode, you can adjust the focus of
an image manually. The following shows focus range in the
Manual Focus mode.
Optical Zoom Factor
Approximate Focus Range
1X
3X
40cm (15.7˝) to infinity (∞)
• Using optical zoom causes the above range to change.
1.
In the REC mode, press [MENU].
2.
Select the "REC" tab, select "Focus", and
then press [ ].
3.
Use [ ] and [ ] to
select "
".
• At this point, a
boundary also appears
on the display,
indicating the part of the
image that will be used
for manual focus.
17cm (6.7˝) to infinity (∞)
Boundary
4.
Press [SET].
5.
While watching the
image on the monitor
screen, use [ ] and
[ ] to focus.
To do this:
Focus in on the subject
Focus out on the subject
• Pressing [ ] or [ ] causes the area inside of the
boundary displayed in step 1 to fill the monitor
screen momentarily to aid in focus. The normal
image will reappear a short while later.
6.
Press the shutter button to record the image.
78
Manual focus position
Do this:
Press [ ].
Press [ ].