Configuring Power Saving Settings - Casio Exilim EX-Z500 User Manual

GETTING READY

Configuring Power Saving Settings

You can configure the settings described below to
conserve battery power.
Sleep : Automatically turns off the monitor
screen if no operation is performed for a
specified amount of time in the REC
mode. Performing any button operation
causes the monitor screen to turn back
on.
Auto Power Off : Turns off power if you do not perform
any operation for a specified amount of
time.
1.
Turn on the camera.
2.
Press [MENU].
3.
Use [ ] and [ ] to select the "Set Up" tab.
4.
Use [ ] and [ ] to select the feature whose
setting you want to configure, and then press
[ ].
G See "Using the On-screen Menus" (page 45) for
information about how to use menus.
To configure this feature:
Sleep
Auto Power Off
5.
Use [ ] and [ ] to change the currently
selected setting, and then press [SET].
• Available Sleep settings are: "30 sec", "1 min", "2 min",
and "Off".
• Available Auto Power Off settings are: "2 min" and
"5 min".
• Note that the Sleep feature does not operate in the
PLAY mode.
• Pressing any button while the camera is in the Sleep
state immediately turns the monitor screen back on.
44
Select this setting:
Sleep
Auto Power Off