Using The Camera With A Macintosh Computer - Casio Exilim EX-Z500 User Manual

VIEWING IMAGES ON A COMPUTER
Using the Camera with a Macintosh
Computer
The following are the general steps for viewing and copying
files from a Macintosh.
You can find details about each operation in the
procedures that follow below. Note that you should also
refer to the documentation that comes with your Macintosh
for other information about USB connections, etc.
IMPORTANT!
• This camera does not support operation on a
computer running Mac OS 8.6 or lower, or Mac OS X
10.0. If you have a Macintosh running Mac OS 9 or
OS X (10.1, 10.2, 10.3 or 10.4), use the standard
USB driver that comes with your OS.
1. Use the USB cradle to establish a connection between
the camera and your Macintosh.
2. View and copy the images you want.
IMPORTANT!
• If you want to transfer files from the camera's built-in
memory to a computer, make sure there is no
memory card loaded in the camera before you place
it onto the USB cradle.
1.
Connect the bundled AC adaptor to the [DC IN
5.3V] connector of the USB cradle, and then
plug it in to a household power outlet.
• If you are using battery power without the AC
adaptor, make sure that the battery is fully charged.
• Note that the shape of the AC adaptor depends on
the area where you purchased the camera.
184
B