Download Print this page

Sealey CP20VPSH Manual

20v 20cm cordless chainsaw head - body only

Advertisement

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear eye
instructions
protection
1. SAFETY
1.1.
GENERAL SAFETY
Familiarise yourself with the applications, limitations and potential hazards peculiar to the
9
cordless chain saw.
Read all safety warnings, instructions and specifications provided.
9
Maintain the cordless chainsaw in good condition. Check for alignment or binding of
9
moving parts and other conditions that may compromise the saws performance.
Replace or repair damaged parts. Use recommended parts only. Unauthorised parts may
9
be dangerous and will invalidate the warranty.
Keep the cordless chainsaw clean for best and safest performance.
9
Evaluate your working area. Determine the presence of any hazards such as power cables, communication cables, fences, walls or
9
other solid objects.
WARNING! Cutting through or touching high voltage cables with the cordless chainsaw could result in death or serious personal
injury due to electric shock.
Keep children and unauthorised persons away from the working area.
9
Keep working area clear. Periodically remove fallen cuttings to a safe area to avoid trip hazards.
9
Only operate the cordless chainsaw in daylight hours with good visibility.
9
Wear suitable ear protection and clothing. Use personal protective equipment (PPE). A full range of personal safety equipment is
9
available from your Sealey stockist.
WARNING! Wear safety helmet, protective eye shield and gloves to protect yourself from falling objects or flying debris.
WARNING! Wear suitable gloves for the application, DO NOT wear cloth gloves, these may become entangled within moving parts,
resulting in possible personal injury.
Remove ill fitting clothing. Remove ties, watches, rings, loose jewellery and contain long hair.
9
1.2.
CORDLESS CHAINSAW SAFETY
Keep handles and grasping surfaces clean and free from oil and grease.
9
Be alert. Use common sense when operating the cordless chainsaw.
9
DO NOT operate the cordless chainsaw if any of the parts are missing as this may cause failure and/or possible personal injury.
8
DO NOT operate the cordless chainsaw when you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
DO NOT use the cordless chainsaw for a task it is not designed to perform.
8
DO NOT use the cordless chainsaw if the switch does not turn it on and off.
8
DO NOT use the cordless chainsaw where there are flammable liquids, solids or gases, such as paint solvents, etc.
8
DO NOT get the cordless chainsaw wet or use in damp or wet locations.
8
DO NOT allow children or untrained persons to operate the cordless chainsaw.
8
DO NOT attempt to modify the cordless chainsaw.
8
DO NOT use the cordless chainsaw in bad weather conditions, especially when there is the risk of lightning or in darkness.
8
Before assembling or adjusting the cordless chainsaw, switch off and remove the battery.
9
Wear protective gloves, not cloth gloves, when handling the saw chain or adjusting the chain tension.
9
Frequently check the chain tension. Adjust as required.
9
Refill the chain oil as required, using a good quality chain oil.
9
In the event of an emergency, immediately switch the cordless chainsaw off.
9
DO NOT use the cordless chainsaw again until the problem has been diagnosed and rectified.
8
If there is an abnormal occurrence (noise, vibration), during use, immediately switch the cordless chainsaw off.
9
Use the shoulder harness. Keep the cordless chainsaw firmly to your right side.
9
Hold the front grip with your left hand and the rear grip with your right hand, regardless if you are left or right handed.
9
Fully grasp the grips.
9
Hold the cordless chainsaw by the insulated gripping surfaces only. The saw chain may contact hidden wiring which could cause
9
personal injury from electric shock.
DO NOT operate the cordless chainsaw with one hand. Loss of control may result in serious personal injury or death.
8
DO NOT over reach. Maintain correct balance and footing and wear non-slip protective footware.
8
DO NOT stand on an unstable or slippery surface, or a steep incline. In winter take precautions to maintain secure footing on ice or
8
snow.
DO NOT operate the cordless chainsaw whilst standing on a ladder or standing within a tree.
8
If the cordless chainsaw receives a heavy impact or is dropped, check it's condition. If there is any damage, however slight, have it
9
repaired by an authorised Sealey service centre.
DO NOT leave the cordless chainsaw running unattended. Always switch off and remove the battery.
8
DO NOT raise your right arm above shoulder height when operating the cordless chainsaw.
8
Take frequent breaks. Operating the cordless chainsaw when tired may lead to lose of control and personal injury.
9
© Jack Sealey Limited
20V 20CM CORDLESS CHAINSAW HEAD -
BODY ONLY
MODEL NO:
Wear protective
Wear safety
gloves
footwear
Original Language Version
CP20VPSH
Wear protective
Wear ear
clothing
protection
Wear a
Wear head
Face shield
protection
Keep away
Beware of
from rain
Electrical
Power Cables
CP20VPSH Issue 1 2/10/21

Advertisement

loading

Summary of Contents for Sealey CP20VPSH

  • Page 1 CP20VPSH MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2: Specification

    100ml capacity oil tank. Requires compatible 20V CP20VPSH battery and mains charger, sold separately. 3. SPECIFICATION Model No: ..............CP20VPSH Battery: ......... CP20VBP2, CP20VBP4, CP20VBP6 Blade length: ...............200mm No-load Speed: ..........Cutting Speed - 8m/s Teeth distance: ............3/8” - 9.5mm Voltage: ..................
  • Page 3: Operation

    6.3. CARRYING THE CORDLESS CHAINSAW 6.3.1. Prior to carrying the cordless chainsaw remove the battery and then attach the guide bar cover (fig 18). CP20VPSH Issue 1 25/10/21 Original Language Version © Jack Sealey Limited...
  • Page 4: Maintenance

    7.1.5. After refilling run the chain saw until the saw chain is fully lubricated. Use only correct oil for application. Contact your Sealey stockist for advice. Use only clean oil that is free from sawdust etc. When pruning trees use botanical oil. Mineral oil can be harmful to trees.
  • Page 5: Troubleshooting

    Battery power drops Recharge the battery cartridge. Replace the battery if recharging is ineffective The drive system does not work Repair at authorised Sealey service centre correctly Abnormal vibration Loose guide bar or saw chain Adjust the guide bar and saw chain tension...
  • Page 6: Environment Protection

    Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk...