NEC Express5800 User Manual page 219

When the system is Windows Server 2003
1.
Open the Network Adapter Property from the Device Manager.
2.
Select the teaming tab, check "Team with other adapters" and click [New Team].
3.
Enter a name of the team and click [Next].
4.
Check adapters to be included in the team and click [Next].
5.
In [Select a team mode], select [Adapter Fault Tolerance] or [Adaptive Load Balancing]
and click [Next].
6.
Click [Finish].
7.
From the Device Manager, open the device property of the team name set above, select
the [Settings] tab, and click [Modify Team].
8.
To set an adapter in the team as the primary adapter, select a driver and click [Set
Primary].
To set an adapter in the team as the secondary adapter, select a driver and click [Set
Secondary].
After terminating both settings, click [OK] and close the screen.
9.
Click [Test Switch].
When the switch test screen is displayed, click [Run Test].
The test is completed if a message stating no problem is displayed as the run result.
10.
Restart the system.
Installing the Operating System B-21