Step 5 - Line-Specific Configuration - Linksys PAP2 Configuration Manual

VoiceDirector Device Configuration Guide
System Tab
3. If you set DHCP to no, enter the Static IP, NetMask, and Gateway
information.
If you set DHCP to yes, continue to step 5.
4. Click the Save Settings button at the bottom of the page to save the
settings.
STEP 5 – LINE-SPECIFIC CONFIGURATION
1. Click the Line1 or Line2 tab at the top of the page, and in the NAT
Settings section, change the following setting:
2. In the Proxy and Registration section (see the screen on the following
page), change the following settings:
All manuals and user guides at all-guides.com
Field
NAT Keep Alive Enable
Field
Proxy
NOTE: If using a DNS, do not
include "http://" in the Proxy
name. For example, if the DNS
name is 000.00.000.00, enter
000.00.000.00 as the Proxy.
Value
no
VoiceDirector
IP address or
Page 3
Linksys PAP2
Value
Enter the
DNS name.