Cisco IG21 Manual page 4

Rebooting or Resetting a Gateway
3. To reboot or reset the device, make sure that the device is connected to power, and use a lengthened
standard size #1 paper clip with wire gauge 0.033 inch or smaller to press and hold the reset button:
• Press and hold the Reset button for 3 seconds: Reboots the device. Configuration settings are not
• Press and hold the Reset button for 10 seconds: Resets configuration options to factory default values
• Press and hold the Reset button for 30 seconds: Resets configuration options to factory default values,
See Figure 5: Reset Button on the IG21, on page 4
(IG31R Shown), on page
Figure 5: Reset Button on the IG21
Rebooting or Resetting a Gateway
4
affected.
and triggers the plug-and-play (PnP) operation for the device. This operation does not erase the
modem APN.
erases the modem APN, and triggers the PnP operation for the device.
5.
Rebooting or Resetting a Gateway
or Figure 6: Reset Button on the IG21R or IG31R