Phone Numbers With Pauses; Accessing The Contacts Submenu - Casio G'zOne Ravine User Manual

Phone Numbers with Pauses

Pauses are used for automated systems (e.g. voicemail or calling
cards). Insert a pause after a set of numbers then enter another set.
The second set of numbers is dialed after the pause. This feature
is useful for dialing into systems that require a code. There are two
different types of pauses you can use when registering a phone
number:
• Wait (W): The handset stops dialing until you press the Left Soft
Key [Release] to advance to the next number.
• 2-Sec Pause (P): The handset waits 2 seconds before
automatically dialing the next set of numbers.
Registering a Phone Number with Pauses
1.
From idle mode, enter the phone number.
2.
Press the Right Soft Key [Options], then press
Pause or
3.
Enter the additional number(s) (e.g. PIN number or credit card
number).
4.
Press the Left Soft Key [Save], then press
Contact.
5.
Complete any additional fields and press the Center Select Key
[SAVE].

Accessing the Contacts submenu

1.
From idle mode, press the Center Select Key [MENU], select
Contacts, then press the Center Select Key [OK].
2.
Select a submenu:
New Contact/Contact List/Groups/New PTT Contact*/PTT
Contact List*/PTT Groups*/Backup Assistant/Speed Dials/In
Case of Emergency/My Name Card
* These options are available only when the PTT feature is turned
on.
48
Add Wait.
Add 2-Sec
Add New