6.
Select the type of icon, then press the Center Select Key
[ENTER].
7.
Select the icon color, then press the Center Select Key [ENTER].
8.
Enter the point name, then press the Center Select Key [ENTER].
9.
Confirmation for the point creation appears. Press the Center
Select Key [ENTER] to register the point.
10.
Press the Center Select Key [OK].
NOTES
•
The Earth Compass cannot be used while the handset is being
charged.
•
When using the electronic compass, orient the handset so its
keypad is horizontal. The compass becomes less accurate when
the keypad is tilted.
•
Any of the following actions can create accuracy issues with the
electronic compass. If any of these occur, recalibrate the handset
as soon as possible.
-
Opening and closing the flip immediately after starting up the
electronic compass.
-
Using the handset near a strong magnet.
-
Leaving the handset for a long time in an area with extreme
temperature change.
-
Allowing the handset to become magnetized.
•
Calibrate the electronic compass with the handset open before
using it with the handset open.
•
To calibrate the electronic compass with the flip
open, hold the handset as shown in the figure to the
right.
120