OCR Type A230
Inspection Procedure
4.11 Checker Area Setting Method
4.11.3
Polygon
Press ENTER to switch between Move all and Set node. Press C to go in the opposite
direction.
When moving a node, pressing A twice adds an additional node, and pressing A and
B deletes a node.
Adding a node
Use the cursor lever to move the added node, then press ENTER to fix it. Press C if you
wish to cancel the addition and revert to Set node mode. More nodes can be added up
to a maximum of 16.
Deleting a node
Delete the selected node. Nodes can be deleted until only the minimum three nodes
remain.
C
ENTER
A
ENTER
Select
A
Add or Delete
B
C
C
B
4 − 27