HIKVISION ADS-24S-12 1224GPCN User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Intercom System
  5. ADS-24S-12 1224GPCN
  6. User manual
HIKVISION ADS-24S-12 1224GPCN User Manual

HIKVISION ADS-24S-12 1224GPCN User Manual

Video intercom analog bundle
Hide thumbs Also See for ADS-24S-12 1224GPCN:
Table of Contents

Advertisement

Quick Links

Download this manual
Video Intercom Analog Bundle
User Manual

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION ADS-24S-12 1224GPCN

Summary of Contents for HIKVISION ADS-24S-12 1224GPCN

  • Page 1 Video Intercom Analog Bundle User Manual...
  • Page 2 WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...
  • Page 3 Video Intercom Analog Bundle User Manual CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY...
  • Page 4 Video Intercom Analog Bundle User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or Danger could result in death or serious injury. Indicates a potentially hazardous situation which, if not Caution avoided, could result in equipment damage, data loss,...
  • Page 5 Video Intercom Analog Bundle User Manual Safety Instruction Warning All the electronic operation should be strictly compliance with the electrical safety ● regulations, fire prevention regulations and other related regulations in your local region. Please use the power adapter, which is provided by normal company. The power ●...
  • Page 6 The power supply must conform to LPS. The recommended adaptor models and ● manufacturers are shown as below. Use the attached adapter, and do not change the adaptor randomly. Model Manufacturer Standard ADS-24S-12 1224GPCN SHENZHEN HONOR ELECTRONIC CO.,LTD G0549-240-050 SHENZHEN GOSPELL DIGITAL TECHNOLOGY CO.,LTD TS-A018-120015Ec SHENZHEN TRANSIN TECHNOLOGIES CO., LTD...
  • Page 7 Video Intercom Analog Bundle User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 8 Video Intercom Analog Bundle User Manual EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/ 65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the...
  • Page 9 Video Intercom Analog Bundle User Manual l'appareil ne doit pas produire de brouillage, et l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada.

  • Page 10: Table Of Contents

    Video Intercom Analog Bundle User Manual Contents 1 About this Maunal ..................1 2 Appearance Description ................2 2.1 Appearance of Door Station ................2 2.2 Appearance of Indoor Station ................3 3 Terminal and Wiring Description ..............5 3.1 Terminal Description ..................5 3.2 Wiring Description ....................
  • Page 11 Video Intercom Analog Bundle User Manual 5 Local Operation ..................24 A. Cables ...................... 26 B. Communication Matrix and Device Command ........28...

  • Page 12: About This Maunal

    Video Intercom Analog Bundle User Manual 1 About this Maunal Get the manual and related software from or the official website ( http:// www.hikvision.com ). Product Model Two-Wire Door Station DS-KV1101-ME2 Two-Wire Indoor Station DS-KH1200...

  • Page 13: Appearance Description

    Video Intercom Analog Bundle User Manual 2 Appearance Description 2.1 Appearance of Door Station Figure 2-1 Appearance Table 2-1 Description Description Description Camera Terminals Loudspeaker Debugging Port Call Button DIP Switch Microphone Screw for Volume Adjustment TAMPER Note The debugging port is used for debugging only.

  • Page 14: Appearance Of Indoor Station

    Video Intercom Analog Bundle User Manual 2.2 Appearance of Indoor Station Front Panel Figure 2-2 Front Panel Table 2-2 Description Description Description Screen Receive/Decline Microphone Unlock Door 2 Volume- Unlock Door 1 Volume+ View/Switch...
  • Page 15 Video Intercom Analog Bundle User Manual Rear Panel Figure 2-3 Rear Panel Table 2-3 Description Description Description Terminals DIP Switch Loudspeaker Debugging Port Power Supply Terminal Note The appearance of the device varies according to different models. Refers ● to the actual device for detailed information. The debugging port is used for debugging only.

  • Page 16: Terminal And Wiring Description

    Video Intercom Analog Bundle User Manual 3 Terminal and Wiring Description 3.1 Terminal Description Terminal of Door Station Figure 3-1 Terminal Description Table 3-1 Terminal of Door Station Type Name Description Cascade For the access of Indoor Station ALARM IN AIN1 For the access of Exit Button of Door 1.
  • Page 17 Video Intercom Analog Bundle User Manual Type Name Description COM1 For the access of Door Lock 2 COM2 Power Output 12VOUT 12 VDC output Grounding Terminal of Indoor Station Figure 3-2 Terminal Description Table 3-2 Terminal of Indoor Station Name Description For the access of Doorbell 1.

  • Page 18: Wiring Description

    Video Intercom Analog Bundle User Manual Name Description Note This terminal of the indoor station supports ● connecting to the main door station. This terminal of the indoor station supports ● cascade connecting to other indoor stations. For the access of Camera 3.2 Wiring Description 3.2.1 Door Lock Wiring Up to 2 door locks can be connected to the door station.
  • Page 19 Video Intercom Analog Bundle User Manual Electric Strike Wiring Figure 3-3 Electric Strike Wiring...

  • Page 20: Door Contact Wiring

    Video Intercom Analog Bundle User Manual Magnetic Lock Wiring Figure 3-4 Magnetic Lock Wiring 3.2.2 Door Contact Wiring AIN2 and AIN4 are used to connect door contact. AIN2 is used to connect door contact of the door 1. AIN4 is used to connect door contact of the door 2. Here takes door contact wiring with AIN2 for example.

  • Page 21: Exit Button Wiring

    Video Intercom Analog Bundle User Manual Figure 3-5 Door Contact Wiring 3.2.3 Exit Button Wiring AIN1 and AIN3 are used to connect door contact. AIN1 is used to connect door contact of the door 1. AIN3 is used to connect door contact of the door 2. Here takes door contact wiring with AIN1 for example.

  • Page 22: Typical Application

    Video Intercom Analog Bundle User Manual Figure 3-6 Exit Button Wiring 3.3 Typical Application The typical application is shown as below. Up to 2 door stations can be connected to the indoor station. Support up to two-three hand in hand topology.
  • Page 23 Video Intercom Analog Bundle User Manual Figure 3-7 Typical Application...

  • Page 24: Installation

    Video Intercom Analog Bundle User Manual 4 Installation 4.1 Door Station Installation 4.1.1 DIP Switch Settings DIP switch 1 is used to coding the room No. of door station. The No. should be unique. DIP switch 2,3,4 are used to coding the unlock duration of the door station. Figure 4-1 DIP Switch The relationship between address of door station and DIP switches is shown as below.

  • Page 25: Accessory Introduction

    Video Intercom Analog Bundle User Manual Table 4-2 Unlock Duration Unlock Durati on(s) DIP2 DIP3 DIP4 4.1.2 Accessory Introduction The installation of door station needs accessories, including junction box, gang box (Type I & Type II), mounting plate and so on. There are 2 size of the gang boxes adapted to the device.
  • Page 26 Video Intercom Analog Bundle User Manual Figure 4-2 Mounting Plate Junction Box The dimension of junction box is 86.7 mm × 159.91 mm × 53.59 mm.

  • Page 27: Surface Mounting Without Gang Box

    Video Intercom Analog Bundle User Manual Figure 4-3 Junction Box 4.1.3 Surface Mounting without Gang Box Video intercom villa door station supports surface mounting. Before You Start Make sure all related equipments are power-off during the installation. ● Accessories that you need to prepare for installation: Mounting plate and ●...

  • Page 28: Flush Mounting With Junction Box

    Video Intercom Analog Bundle User Manual Figure 4-4 Surface Mounting without Gang Box 4.1.4 Flush Mounting with Junction Box The device supports flush mounting with junction box. Before You Start Make sure all related equipments are power-off during the installation. ●...

  • Page 29: Flush Mounting With Gang Box(Type I)

    Video Intercom Analog Bundle User Manual Figure 4-5 Flush Mounting with Junction Box 4.1.5 Flush Mounting with Gang Box(Type I) The device supports flush mounting with gang box. Before You Start Make sure all related equipments are power-off during the installation. ●...

  • Page 30: Flush Mounting With Gang Box(Type Ii)

    Video Intercom Analog Bundle User Manual 4. Secure the door station to the mounting plate with the set screw. Figure 4-6 Flush Mounting with Gang Box (Type I) 4.1.6 Flush Mounting with Gang Box(Type II) The device supports flush mounting with gang box. Before You Start Make sure all related equipments are power-off during the installation.

  • Page 31: Indoor Station Installation

    Video Intercom Analog Bundle User Manual Figure 4-7 Flush Mounting with Gang Box (Type II) 4.2 Indoor Station Installation 4.2.1 Configure Ringtone DIP switch 1 and 2 are used to coding the ringtone of the indoor station. Figure 4-8 DIP Switch The relationship between the ringtone and DIP switches is shown as below.

  • Page 32: Wall Mounting

    Video Intercom Analog Bundle User Manual Table 4-3 Ringtone Ringtone DIP 1 DIP 2 Ringtone 1 Ringtone 2 Ringtone 3 Mute 4.2.2 Wall Mounting It supports wall mounting. There are two installation modes. Before You Start Make sure the device in the package is in good condition and all the assembly ●...
  • Page 33 Video Intercom Analog Bundle User Manual Figure 4-9 Mounting Plate Steps 1. Cave a hole in the wall. Note The suggested dimension fo the installation hole should be larger than the gang box. 2. Insert a gang box to the hole chiseled on the wall. 3.
  • Page 34 Video Intercom Analog Bundle User Manual Figure 4-10 Wall Mounting...
  • Page 35 Video Intercom Analog Bundle User Manual 5 Local Operation Communication You can call the resident by pressing the call button on the door station. Press the call button of the door station, all linked indoor station start ringing. Note While one of linked indoor stations receive the call, the others will stop ringing.
  • Page 36 Video Intercom Analog Bundle User Manual Tap Volume- button on the indoor station to turn down the volume of indoor station.
  • Page 37 Video Intercom Analog Bundle User Manual A. Cables Cables and Wiring When there are multiple cores in one parallel line, only one pair of closed ● cores are allowed to transmit signal. It is not allowed to use multiple pair of cores in one cable to transmit signal.
  • Page 38 12W. Please reach local technical support if you are not sure about power consumption of each module. Door station should be connected to CH1 of the video/audio distributor. Power supply must be certified by Hikvision. ●...
  • Page 39 B. Communication Matrix and Device Command Communication Matrix Scan the following QR code to get the device communication matrix. Note that the matrix contains all communication ports of Hikvision access control and video intercom devices. Figure B-1 QR Code of Communication Matrix Device Command Scan the following QR code to get the device common serial port commands.
  • Page 40 UD00000B...

This manual is also suitable for:

G0549-240-050Ts-a018-120015ec

Table of Contents