Mid-range directional microwave detectors with photocell for use with cdw12u5, cdh4u5 & cdh8u5 programmable intelligent lighting control modules (4 pages)
Page 1
Honeywell MLS Digital Detector MLS2000DF for DSI ballasts MLS2000DALIF for DALI ballasts Installation and Commissioning Instructions Note: QuickSet Pro required for commissioning HC5A available for user override...
Page 2
MLS Digital Detector: MLS2000DF for DSI ballasts / MLS2000DALIF for DALI ballasts Only suitably qualified personnel should install this equipment. MLS Digital Detectors are the high-performance, communicating presence detectors at the heart of the advanced MLS Digital lighting management system. These detectors are equipped with a regulating photocell to work with digital DSI/DALI ballasts.
Page 3
Commissioning Detectors Using the QuickSet Pro It is important that the Programmer be held perpendicular and at a distance of between 0.5m and 2m from the detector. 1. Switch on by pressing any button (and unlock with top left rectangular button). 2.
Page 4
Therefore, products of this type should be regarded as capable of maintaining an APPROXIMATE light level only. Honeywell Ex-Or At the end of their useful life St.