Philips CMD305A/05 Service Manual page 2

CMD305A Dismantlement Method
1. Remove the two screws on the top cover, remove top cover; Then remove the five screws on the heat sink, remove heat sink
2. Remove the six screws on the back cover, remove back cover; Remove the four screws at the left/right side of the unit
3. Remove the FFC wich was connected from panel to main board, remove panel; Remove the screws which was used to fix the main board and remove the wires
which were connect with the small board, take out the main board.
4. Remove the five screws on the KB board
2