HIKVISION DS-K1T671 Series Quick Start Manual

DS-K1T671(B) Series Face Recognition Terminal
Quick Start Guide
UD27101B
©2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instruc ons for using and managing the Product. Pictures, charts, images and all
other informa on hereina er are for descrip on and explana on only. The informa on contained in the
Manual is subject to change, without no ce, due to firmware updates or other reasons. Please find the
latest version of this Manual at the Hikvision website (h ps://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals trained in suppor ng the
Product.
Trademarks
and other Hikvision's trademarks and logos are the proper es of Hikvision in various
jurisdic ons.
Other trademarks and logos men oned are the proper es of their respec ve owners. Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED,
WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH ALL FAULTS AND
ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE
PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS
OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF
DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE),
PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND
HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR
OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER
INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF
REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY
RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE
RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF
THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY
RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY
PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS
DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY
ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN
SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER
PREVAILS.
Data Protec on
During the use of device, personal data will be collected, stored and processed. To protect data, the
development of Hikvision devices incorporates privacy by design principles. For example, for device with
facial recogni on features, biometrics data is stored in your device with encryp on method; for fingerprint
device, only fingerprint template will be saved, which is impossible to reconstruct a fingerprint image.
As data controller, you are advised to collect, store, process and transfer data in accordance with the
applicable data protec on laws and regula ons, including without limita on, conduc ng security controls
to safeguard personal data, such as, implemen ng reasonable administra ve and physical security
controls, conduct periodic reviews and assessments of the effec veness of your security controls.
Scan the QR code to get the user manual for detailed informa on.
Use only power supplies listed in the user instruc ons:
Model Manufacturer Standard
C2000IC12.0-24P-DE MOSO Power Supply Technology Co., Ltd CEE
C2000IC12.0-24P-GB MOSO Power Supply Technology Co., Ltd BS
ADS-24S-12 1224GPG Shenzhen Honor Electronic Co., Ltd CEE
1 Installation
Installa on Environment:
Indoor and outdoor installa on are supported.
If installing the device outdoors, you should apply Silicone sealant
among the cable wiring area to keep the raindrop from entering.
Backlight Direct
Sunlight
Indirect Sunlight Close to Light
through Window
Direct Sunlight
through Window
2 Wiring (Normal)
Before you start:
According to the baseline on the moun ng template, s ck the moun ng template on the wall or other surface, 1.4 meters
higher than the ground.
Make sure the output of external power supply fulfils LPS.
Steps:
1 Drill holes on the wall or other surface according to the moun ng template and install the gang box.
Use two supplied screws(4_KA4x22-SUS) to secure the moun ng plate on the gang box.
2
Use another four supplied screws to secure the moun ng plate on the wall.
Route the cables through the cable hole of the moun ng plate, and connect to the corresponding external device's cables.
Apply Silicone sealant among the cable wiring area to keep the raindrop from entering.
Insert the fingerprint module to the holes at the bo om of the main part.
3
Align the device with the moun ng plate and hang the terminal on the moun ng plate.
4
Make sure the two sheets on each side of the mount plate have been in the holes at the back of the
5
device.
Use two supplied screws (SC-M4x12TP10-SUS) to secure the device and the moun ng plate.
A er installa on, for the proper use of the device (outdoor use), s ck the protec on film (parts of models
6
supplied) on the screen.
Apply
Silicone
The installa on height here is the recommended height. You can change it according to your actual needs.
sealant
You can also install the device on the wall or other places without the gang box. For details, refer to the User
Manual.
For easy installa on, drill holes on moun ng surface according to the supplied moun ng template.
You should purchase the gang box separately.
87 mm
Hole1 Hole1
Moun ng Template
Datum 4
Recommended Height:1.40 m.
1
Hole2
2
Hole3
Hole2 Hole2
3
Hole1 Hole1
Hole2
Network Interface
Dimension:
White Light
Camera
Screen
Card Presen ng Area
Fingerprint Scanner
5
5
GND
(NC)
(COM)
(NO)
Door Contact
BTN
IR Light IR Light USB Interface
116.5 mm 33 mm
SIM Card Slot
(Reserved)
Debugging Port
(For debugging only)
Power Interface
Wiring Terminal
TF Card Slot
(Reserved)
The figures are for reference only.
When connec ng door contact and exit bu on,
the device and the RS-485 card reader should
use the same common ground connec on.
The Wiegand terminal here is a Wiegand input
terminal. You should set the device's Wiegand
direc on to "input". If you should connect to
an access controller, you should set the
Wiegand direc on to "Output". For details, see
the user manual.
The suggested external power supply for door
lock is 12 V, 1 A.
The suggested external power supply for
Wiegand card reader is 12 V, 1 A.
For wiring the fire system, see the user manul.
Do not wire the device to the electric supply
directly.