The Stitch Shown In The Pattern Indication Window Is Different From The One Being Sewn; 17.Light Is Off; Motor Does Not Run - Brother XL-6060 Series Service Manual

PROBLEM CAUSE
16.The stitch 1. Release volume is too small.
shown in the
pattern 2. The indicate gear and pattern indicator plate are not
indication
window is
different from
the one being
sewn.

17.Light is off.

1. Inferior light bulb.
18.Motor does not 1. Inferior foot controller.
run. 2. Inferior motor or inferior brush.
aligned correctly.
www.promelectroavtomat.ru
-58-
CORRECTION
1. Adjust the release volume.
* Refer to P.34.
2. Adjust the pattern indicator.
* Refer to P.44.
1. Replace the light bulb.
1. Replace the foot controller.
2. Replace the motor.
* Be sure to turn off the power.