Table of Contents
Advertisement
2 U
O
SER
PERATIONS
2.1 Recording
To begin recording, press the Record button. RECORD will be indicated for
three seconds, near the upper left hand corner of the primary monitor. The
unit always starts recording at the end of the previously recorded data.
Recording will continue until:
Another mode is selected (Play mode, Reverse Play,or Stop
mode).
The disk is full (In No Overwrite and Overwrite Once modes).
See section 5.1 Advanced Menu
page 5-1, for details regarding Disk Overwrite modes.
Normal Recording
The unit records at the normal record speed until an alarm condition is detected.
The normal record speed is indicated on the monitor if the display option is enabled,
and can be altered using the Up/Down Record Speed buttons, or in the menu
system.
For information about altering the normal record speed from the menu system, see
Main Menu
Record Settings
Operator Programming section of this manual.
The normal record speed can be altered while the unit is recording. The unit will
continue recording while the menu system is active.
Alarm Recording
When an alarm condition is detected, the unit automatically switches to the
alarm record speed. The alarm condition is indicated in several ways:
With the word ALARM, displayed on the primary monitor, near the
upper left hand corner of the screen.
With the internal buzzer (if activated in the menu system). For
information about activating the internal buzzer during alarms, see
Main Menu
section of this manual.
By an external device, connected to the alarm output of the unit (if
the unit is installed that way).
The alarm record speed cannot be changed using the Up/Down Record Speed buttons on the front
panel. The alarm record speed must be changed in the menu system. For information about altering
the alarm record speed, see Main Menu
of the Operator Programming section of this manual.
The unit returns to the normal record speed when the alarm condition ends.
0150-0238A
Disk Overwrite Mode on
Normal Record Speed, on page 4-5 of the
Alarms on page 4-2 of the Operator programming
Record Settings
2-1
RECORD
Record button
Record Speed
Alarm Indicator
Alarm Record Speed, on page 4-5
Calibur DSR-1000eZ
REC/PLAY
SPEED
buttons
ALARM
Advertisement
Table of Contents
