Operation - Makita BO4900V Instruction Manual

Emptying dust bag
When the dust bag is about half full, switch off and
unplug the tool. Hold the tool and remove the dust bag
from the dust nozzle while pressing the push button.
1
► 1. Push button
2
► 1. Dust nozzle 2. Hook 3. Dust bag 4. Push button
After emptying the dust bag, insert the hook on the
dust nozzle into the rectangular hole on one side of the
dust bag frame until it clicks into place on the oush the
button.
1
4
3
Connecting to vacuum cleaner
When you wish to perform cleaner operation, connect a
vacuum cleaner to your tool. Connect a hose of vacuum
cleaner to the dust nozzle.

OPERATION

CAUTION:
• Never run the tool without the abrasive paper.
You may seriously damage the pad.
• Never force the tool. Excessive pressure may
decrease the sanding efficiency, damage the
abrasive paper and/or shorten tool life.
• The front grip is a screwed type one. Always
be sure that the front grip is tightened securely
before operation.
Turn the tool on and wait until it attains full speed. Then
gently place the tool on the workpiece surface. Keep the
base flush with the workpiece and apply a light pressure
on the tool.
7 ENGLISH