1-5 Playing back the
1
1-5-1 Playing back the shooting location
recorded on a tape
Preparation
Perform the following to display shooting locations recorded on a tape
on a monitor of a personal computer using mapping software.
• Connections
For detailed information, see the following "Connections".
• Setting the output format of data from the camcorder
For detailed information, see "1-7 Menu Setup" on page 1-23.
Connections
Connect the REMOTE connector of the camcorder and the RS-232C
connector of the computer on which mapping software has been
installed.
1-18
Chapter 1 Using GPS Data
Shooting Location