Table of Contents
Advertisement
Anynet+ (HDMI-CEC) Issues
When Anynet+ (HDMI-CEC) isn't working, these steps may help resolve the problem.
The problem
What is Anynet+?
Anynet+ does not work.
I want to start Anynet+.
I also want the connected devices
to turn on when the Projector is
turned on.
I want to exit Anynet+.
It is inconvenient to turn on other
devices because the Projector also
turns on. It is inconvenient
because the connected devices
(e.g. set-top box) turn off
together.
You can use the Projector's remote control to control external devices that support
Anynet+ (HDMI-CEC) and that are connected to the Projector via an HDMI cable. For
example, if a connected external device supports Anynet+, you can have the
connected device turn on or off when you turn the Projector on or off.
Confirm that the device is an Anynet+ device. The Anynet+ system supports Anynet+
devices only.
Check if the power cable of the Anynet+ device is properly connected.
Check the cable connections of the Anynet+ device.
Go to
Anynet+ (HDMI-CEC)
•
Settings
Anynet+ may not function when some other functions are active, including Channel
Search, Smart Hub, Initial Setup, etc.
If you have disconnected and then reconnected the HDMI cable, scan for devices again
or turn your Projector off and on.
Move the focus to the Anynet+ device at
button to move to
Anynet+
Check if the Anynet+ device is properly connected to the Projector, and then select
Anynet+ (HDMI-CEC)
menu to see if
•
Settings
To turn off the Anynet+ function of a device connected to the Projector, turn off the
Anynet+ (HDMI-CEC)
function of the device.
•
Settings
When
Anynet+ (HDMI-CEC)
port does not turn off and on together with the Projector. To prevent a specific device
connected to the Projector from turning off automatically, turn off the HDMI-CEC
function on a specific device connected to the Projector.
HDMI (ARC) is supported by some models. Check the HDMI port name of the
purchased product's model.
- 133 -
Try this!
and see if
Anynet+ (HDMI-CEC)
General
External Device Manager
(HDMI-CEC), and then press the Select button.
Anynet+ (HDMI-CEC)
General
External Device Manager
General
External Device Manager
is turned off, the sound bar connected via HDMI (eARC)
has been set to On.
Anynet+ (HDMI-CEC)
Source, press the up directional
is set to On.
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
Advertisement
Table of Contents
