Sound And Noise Issues; Testing The Sound - Samsung SP-LSP9TGA E-Manual

Sound and Noise Issues

When the Projector has difficulties with sound, these steps may help resolve the problem.

Testing the sound

Settings Support
If the Projector plays the
the broadcast signal's strength.
The problem
How can I connect an audio device
to the Projector?
There is no sound or the sound is
too low at maximum volume.
The picture is good but there is no
sound.
Device Care
Sound Test melody without distortion, there may be a problem with an external device or
The connection method may differ depending on the audio device such as HDMI
(eARC), Optical, Bluetooth and Wi-Fi.
HDMI (ARC) is supported by some models. Check the HDMI port name of the
purchased product's model.
For more information about how to connect an audio device, run
•
Check the volume control of your Projector, and then check the volume control of the
external device (cable box or satellite box, DVD, Blu-ray, etc.) connected to your
Projector.
Check the cable connection between an external device and the Projector, and then
try cable connection again.
Set Sound Output
•
If you are using an external device, check the device's audio output option.
For example, you may need to change your cable box's audio option to HDMI if the box
connected to your Projector is using an HDMI cable.
To listen to computer sound, connect an external speaker to the computer's audio
output connector.
If your Projector has a headphone jack, make sure there is nothing plugged into it.
Reboot the connected device by disconnecting and then reconnecting the device's
power cable.
With a set-top box or cable box, check the cable connection and reboot the external
device. When the symptom persists, contact your service provider.
Self Diagnosis Sound Test
Try this!
Source Connection Guide
to Projector Speaker.
Settings Sound Sound Output
- 126 -
Try Now
Connection
Audio Device
Guide.