Table of Contents
Advertisement
Caring for your LED projector
•
Switch off then unplug the LED projector from the power outlet
before cleaning it.
•
When cleaning the LED projector's housing, use a clean soft cloth
dampened with water or a mix of water and neutral detergent. Wipe
it dry using a soft dry cloth.
•
Ensure that the lens is cool before cleaning it. Gently wipe the lens
using a lens cleaning paper. Do not touch the lens with your hands.
•
Do not use liquid or aerosol cleaners, benzene, or thinners on your
LED projector.
•
Never operate this LED projector immediately after moving it from a
cold location. When the LED projector is exposed to a drastic change
in temperature, moisture may condense on the lens and its other
internal parts. To prevent this, use the unit two (2) hours after an
extreme or sudden change in temperature occurs.
Battery precautions
•
When replacing the battery, do not replace it with an incorrect type
that can defeat the safeguard.
•
Do not dispose the battery into fire or a hot oven, or mechanically
crushing or cutting the battery, as doing so may lead to an explosion.
•
Leaving the battery in an environment with extremely high
temperature may lead to an explosion, or the leakage of flammable
liquid or gas.
•
A battery subjected to extremely low air pressure may lead to an
explosion, or the leakage of flammable liquid or gas.
•
When the main power input is disconnected from the device, the
disconnected device should still remain readily operable.
8
LED projector User Manual
Advertisement
Table of Contents
