Cisco DECT 6823 User Manual page 13

Hold and Resume a Call
You can put a call on hold and then resume it.
From an active call, press Hold.
Step 1
Step 2 Press Resume to pick the call back up.
Swap Between Active and Held Calls
When you have an active call and a held call, you can easily swap the calls. The
current active call goes on hold and the previously held call becomes the active
call. Perform one of these actions:
Press up or down on the navigation ring.
6823 Handset
6825 Handset Press up or down on the navigation ring, or Press Swap.
11