Routing The Optical Cable Or Optical Fiber (Upstream) - Huawei F01T100 Quick Installation Manual

11 Routing Cables

11.7 Routing the Optical Cable or Optical Fiber (Upstream)

Do not look into the optical port without eye protection.
You must use corrugated tube to protect core wires of optical cables in the cabinet, and use the binding strap
•
to bind optical fibers; do not drag or bind the optical fiber too tightly.
The bending radius of the optical cable core or optical fiber must be 20 times larger than the diameter of the
•
optical cable core or optical fiber. Generally, the bending radius is larger than or equal to 40 mm.
Only the qualified personnel are allowed to splice the optical fiber. Ensure that the optical fiber is spliced
•
according to the on-site requirements and local practice.
Cabinet bottom (top view)
Front door side of the cabinet
Install the adapters attached to
the cabinet on the installation
rack of
the adapter.
Cable hole for optical cable
Battery compartment bottom (top view)
Front door side of the cabinet
Steel wire must be connected to the grounding point.
Grounding point
(for the optical
cable)
Optical cable
To the ODF outside the cabinet
32
Cable hole for optical cable
Steel wire
Optical cable