Maintenance and cleaning
3. Manually remove dirt. Use the non-abrasive tool.
4. Rinse with low-pressure tap water.
5. If necessary, apply wax on the front for extra protection and gloss.
6. If there was rust and you want it not to appear again, apply a rust-preventive
primer. Ask the manufacturer for specifications and instructions.
7.3
Do a visual check of the EVSE
Preliminary requirements
Procedure
1. Do a visual check for damage on these parts:
2. If you see damage, contact the manufacturer. Refer to section 1.12.
7.4
Replace the air inlet filter
Preliminary requirements
66
Caution: Do not use abrasive tools. There is a risk of damage to
the finish of the EVSE, that can cause deep corrosion and structural
damages.
•
Owner
Part
EV charge cables and connectors
Touchscreen
Coating of the cabinet
Cabinet
•
Owner
•
Spanner
Damage
Cracks or ruptures
Internal wires of the cable are visible
Cracks
Touchscreen does not work
Cracks or ruptures
Signs of rust that cause ingress of wa-
ter
•
Air inlet filters. Refer to
section 10.22.
9AKK108466A3703-EN | 001