NEC DS1000 Manual page 34

Features
30
phone in the building, implement Walking Class of Service, and dial without restriction. After the
phone goes idle, Walking Class of Service remains in effect for 10 seconds. This permits you to
make multiple calls before the phone returns to its normal restrictions.
To enable Walking Class of Service at a co-worker's extension:
1. Press ICM .
2. Dial ##0 .
At a 22- or 34-Button Display Telephone, you see:
At a Super Display Telephone, you see:
If your extension does not have a PIN code already entered, skip to step 4.
When entering a PIN number or extension number:
- CLEAR erases your entire entry.
- LND backspaces over (erases) the last digit entered.
3. Enter your own extension number + HOLD .
At a 22- or 34-Button Display Telephone, you see:
At a Super Display Telephone, you see:
4. Enter your PIN number + HOLD .
If your extension does not have Walking Class of Service capability, you will hear
error tone.
5. Place any call or use any feature allowed by your Toll Restriction and Class of Service settings.
You can place additional calls. Walking Class of Service will automatically deactivate
after 10 seconds.
DS1000/2000 Feature Handbook Supplement