Table of Contents
Advertisement
18/45
Bosch Rexroth AG | Electric Drives
Technical Data
4.4.3
UL/CSA Certified
4.5
Compatibility Test
Rexroth IndraControl VAU 01.1Z | Project Planning Manual
and Controls
The devices of the IndraControl VAU 01.1Z family are certificated according to
●
UL508 (Industrial Control Equipment) and
●
C22.2 no. 142-M1987 (CSA)
UL file no. E210730
But there can be combination or extension stages with limited or missing cer‐
tification. Thus, the registration is to be verified according to the UL marking on
the device.
The UL/CSA marking is only valid for the device in its delivery status
(ex works). After modifying the device, e.g. after plugging additional
extension cards, UL compliance must be checked.
All Rexroth controls and drives are developed and tested according to the latest
state-of-the-art of technology.
As it is impossible to follow the continuing development of all materials (e. g.
lubricants in machine tools) which may interact with our controls and drives, it
cannot be completely ruled out that any reactions with the materials used by
Bosch Rexroth might occur.
For this reason, before using the respective material a compatibility test has to
be carried out for new lubricants, cleaning agents etc. and our housings / our
housing materials.
Advertisement
Table of Contents
