STORAGE
When vacuuming is complete, your RIDGID Wet/Dry
Vac has convenient storage locations.
ACCESSORY STORAGE (Fig. 7)
1. The Car Nozzle (H) is stored in the Car Nozzle
Compartment, located on top of the Handle.
2. The Accessory Storage Bin holds the Utility
Nozzle (F) and Three Extension Wands (G).
To secure the Extension Wands (G), slide the large
end of each Wand onto the Accessory Storage Bin
as shown in Figure 7.
CORD STORAGE (Fig. 8)
1. To Store Cord: Wrap the Power Cord around the top
of the Handle on the Vac
2. Secure the Power Cord using the Cord Clip on the
Polarized Plug.
HOSE STORAGE (Fig. 8)
1. Wrap the Hose (I) around the Vac as shown and
place the small Swivel End inside the larger one.
WARNING:
Do not put any object into ventilation openings.
Do not vacuum with any ventilation openings
blocked; keep free of dust, lint, hair or anything
that may reduce air flow.
CAUTION:
Do not operate vacuum while the hose is still
wrapped around the powerhead assembly in the
storage position.
Polarized
Plug Clip
Accessory Storage Bin
(G)
(H)
(F)
Car Nozzle
Compartment
(G)
Accessory
Storage Bin
EMPTY STORAGE BIN
Storage Bin
FILLED STORAGE BIN
Utility Nozzle
Placement
Extension Wand Placement
Car Nozzle Compartment
Carry Handle
8
Fig. 7
(H)
(F)
Accessory Storage
Pins
Fig. 8
Power Cord
(I)