Rear Propshaft; Removal; Installation - Polaris Sportsman XP 1000 S 2020 Service Manual

REAR PROPSHAFT

REMOVAL

IMPORTANT
Before you remove the rear propshaft from the vehicle,
add a mark on the rear propshaft flange.
1. Locate the rear propshaft through the rear RH wheel
well.
2. Remove the (4) bolts retaining the rear propshaft to
the rear propshaft flange and discard the bolts.
3. Slide the shaft towards the transmission and pivot the
propshaft down. Slide the propshaft off the
transmission output shaft and out from the vehicle.
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
© Copyright Polaris Inc.

INSTALLATION

1. Apply anti-seize compound to all splines.
2. Slide propshaft back onto the transmission output
shaft, and then lift it up and align it with the mark on
the rear propshaft flange.
3. Install new bolts and torque to specification.
TORQUE
Rear Propshaft Bolts
22 ft-lbs (30 N·m)
FINAL DRIVE
8
8.45