Stator Cover Assembly View - Polaris Sportsman XP 1000 S 2020 Service Manual

STATOR COVER ASSEMBLY VIEW

STATOR COVER ASSEMBLY VIEW
REF. DESCRIPTION
q Key
w Flywheel
e
Crankshaft Seal
Flywheel Retaining Bolt
r
t
Stator Cover Gasket
y
Stator Screws
u
Stator
i O-Ring
o Water Pump Drive Coupler
Water Pump Bearing
a
Crankshaft Position Sensor (CPS) Fastener
s
Crankshaft Position Sensor (CPS)
d
f Crankshaft Position Sensor (CPS) O-Ring
g Stator Cover with Water Pump
h
Stator Cover Fasteners
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
© Copyright Polaris Inc.
ENGINE / COOLING SYSTEM
NOTES
74 ft-lbs (100 N·m)
Apply Loctite® 534 Hi-Tack gasket dressing
to engine side of gasket to secure prior to
assembly. Sealant bead should face the
cover.
89 in-lbs (10 N·m)
All coupler spline teeth must be coated with
Polaris Premium Starter Grease (PN
2871460) before assembly.
89 in-lbs (10 N·m)
Lubricate o-ring with White Lithium Grease
(8570044) or engine oil.
Apply corrosion resisting dielectric grease to
stator cover grommet.
Apply Moly Lube Grease to internal spline; all
spine teeth must be coated with grease prior
to assembly.
89 in-lbs (10 N·m)
Torque in sequence shown.
3
3.39