ENGINE OIL COOLER SERVICE
REMOVAL
1. Drain engine coolant. Refer to Coolant Service page
3.80.
2. Remove the headpipe assembly. Refer to Headpipe
Service page 3.22.
3. Slide the two hose clamps
w
e
and outlet
coolant hoses. Remove coolant
hoses from the oil cooler.
CAUTION
Catch and properly dispose of any escaping coolant .
4. Remove the four fasteners
t
to the engine. Remove the oil cooler.
CAUTION
Catch and properly dispose of any escaping oil or
coolant.
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
© Copyright Polaris Inc.
q
back securing the inlet
r
securing the oil cooler
ENGINE / COOLING / EXHAUST
5. Discard the oil cooler O-rings
INSTALLATION
1. Install two new oil cooler O-rings
2. Install the oil cooler assembly
engine using the four oil cooler fasteners
to specification.
TORQUE
Oil Cooler Fasteners:
7 lb-ft (10 Nm)
y
.
3
y
.
t
and secure to the
r
. Torque
3.85