Download Print this page

Panasonic EH-HV20 Service Manual

Straight & curl straightener

Advertisement

Quick Links

TABLE OF CONTENTS

1 Warning ---------------------------------------------------------------------------
2 Specifications ----------------------------------------------------------------
3 Troubleshooting Guide ----------------------------------------------------
4 Disassembly and Assembly Instructions --------------------------
5 Wiring Connection Diagram----------------------------------------------
6 Schematic Diagram --------------------------------------------------------
(Household) Straight & Curl Straightener
Model No. EH-HV20
Asia
CIS
Middle East
Page
1
1
2
4
9
9
10
Order Number PEWT1511A86CE
© Panasonic Corporation 2015 Unauthorized copying
and distribution is a violation of law.

Advertisement

loading

Summary of Contents for Panasonic EH-HV20

  • Page 1: Table Of Contents

    2 Specifications ---------------------------------------------------------------- 3 Troubleshooting Guide ---------------------------------------------------- 4 Disassembly and Assembly Instructions -------------------------- 5 Wiring Connection Diagram---------------------------------------------- 6 Schematic Diagram -------------------------------------------------------- 7 Exploded View & Replacement Parts List ------------------------- © Panasonic Corporation 2015 Unauthorized copying and distribution is a violation of law.
  • Page 2: Warning

    In case of using high temperature soldering iron, please be careful not to heat too long. - Pb free solder will tend to splash when heated too high (about 1100°F / 600 ℃). 2. Specifications EH-HV20 Model Sales Area Asia / CIS / Middle East...
  • Page 3: Troubleshooting Guide

    3. TROUBLESHOOTING GUIDE Refer to WIRING CONNECTION DIAGRAM. < CHECKING PROCEDURE > < CHECKING METHOD > < REMEDY > No operation (LED does not light) Check the conductivity Check Power cord. Replace the Power Cord of power cord. Check continuous at Switch ON Check Power Switch Replace Power switch position...
  • Page 4: Disassembly And Assembly Instructions

    4 Disassembly and Assembly instructions 4.1 Disassembly instruction (1) Remove Hinge Cover from Main Body (4) Remove 3 screws for fitting Press Plate side by Slotted screw driver (Minus Driver.) by Phillips screw drivers (Plus Driver). Hinge Cover Minus Driver Screws (2) Remove Hinge Pin by hand pressing at (5) Remove Press Plate Cover from Press Plate...
  • Page 5 (8) Remove 2 screws for fitting Housing side by Phillips screw drivers (Plus Driver). Screws (9) Remove Housing B from Housing A in Grip follow as below drawing. Housing B (10) Take off Iron Plate and Circuit assembly block from Housing A Housing A Circuit assembly block...
  • Page 6 4.2 Assembly Instructions 1. Arrange Lead wire into rib of Press Plate as shown in Figure Lead wire Brown Lead wire Green Lead wire Violet Lead wire Brown Lead wire Gray Lead wire Orange Lead wire Blue 2. Arrange Lead wire into rib of Hosing A as shown in Figure Lead wire Gray Lead wire White Lead wire Brown...
  • Page 7: Wiring Connection Diagram

    5. WIRING CONNECTION DIAGRAM Green Brown HB_2 Orange HA_2 Violet Brown Heater A (Housing side) Gray HA_1 HB_1 Orange Asia Brown Heater B (Press Plate side Blue Blue Middle East Orange Green Brown Violet 6. SCHEMATIC DIAGRAM...
  • Page 8: Exploded View & Replacement Parts List

    7 EXPLODED VIEW & REPLACEMENT PARTS LIST 7.1 Model No. : EH-HV20 Exploded View Asia Middle East All parts are supplied from PMFTH-AP through PLAP...
  • Page 9 Model No. : EH-HV20 Parts List Ref. Safety Part No. Parts Name & Descriptions Q'ty Remarks EHHV20HSABW HOUSING A EHHV20HABW HEATER A ASSEMBLY BLOCK (FOR OTHER) EHHV20HAB8W HEATER A ASSEMBLY BLOCK (FOR RUSSIA / KAZAKHSTAN / UKRAINE) EHHV20CCAW CIRCUIT ASSEMBLY BLOCK...