Changing The Fm Radio Reception Settings; Switching The Receiver Sensitivity Of The Fm Radio - Sony ICD-UX512 Operating Instructions Manual

Changing the FM Radio Reception Settings

Switching the receiver
sensitivity of the FM radio
You can set the receiver sensitivity when
listening to the FM radio.
1
Select the
LOCAL" in the menu while listening to
FM radio, and then press
72 GB
x STOP
N /ENT
v , V
(FM radio) tab t "DX/
N /ENT.
2
Press v or V on the control button to
select "DX" or "LOCAL," and then press
N /ENT.
3
Press STOP to exit the menu mode.
x
DX Normally, select this setting.
LOCAL When there is interference or
collapsing caused by a intense
electric field around the transmitting
antenna of the broadcasting station,
etc., select this setting.
"DX/LOCAL" is set to "DX" when you
purchase the IC recorder.
P Note
Select "DX" when the IC recorder reception
status is not good due to a weak signal.