Step 2: Recharging The Battery; Recharging The Battery Using A Computer; Ic Recorder; Remove The Film On The Display Window - Sony ICD-UX512 Operating Instructions Manual

Step 2: Recharging the Battery

Recharging the battery
using a computer

Remove the film on the display window

before you use the IC recorder.

Connect the IC recorder to a running
computer, and charge the battery until the
battery indicator indicates "
It takes about 3 hours and 30 minutes to
fully charge an exhausted battery.*
1
Insert a rechargeable battery.
Slide and lift the battery compartment
lid, insert an NH-AAA rechargeable
battery with correct polarity, and close
the lid.
2
Connect the IC recorder to your
computer.
Slide the USB slide lever on the back of
the IC recorder in the direction of the
12 GB
arrow, and insert the USB DIRECT
connector into the USB port of a running
computer.*
."
1
While the battery is charging,
"Connecting" and the battery indicator
are displayed in an animation.
2
Computer

IC recorder

To USB port of
your computer
Battery indicator