Sony ICD-UX512 Operating Instructions Manual page 132

Message
File Damaged
Format Error
Process Error
Stop and Reinsert Memory
Card
Advise to not listen at high
VOL for long periods
Set Date&Time
Track Marks are Full
No File
No Track Marks
Low Battery Level
132
GB
Cause/Remedy
• You cannot play back or edit files, because the data of the selected
file is damaged.
• The IC recorder cannot be turned on using the computer because
there is no copy of the control file required for operation. Format
the IC recorder using the formatting function in the menu
(page 91). Do not use your computer to format the IC recorder.
• The IC recorder failed in memory access. Remove and then re-
insert the battery.
• Save a backup copy of your data and format the IC recorder using
the menu (page 91).
• A memory card was inserted during recording or playback.
Remove the memory card and insert it while the IC recorder is in
the stop mode.
• "AVLS" in the menu is set to "OFF." Please be careful not to
listen at an excessive volume.
• Set the clock; otherwise, you cannot set the alarm.
• You can set up to 98 track marks for a file. Cancel unwanted track
marks (page 61).
• The selected folder does not have any files. You cannot move a
file or set the alarm, etc., because of this.
• There are no track marks when you attempt to erase a track mark
or track marks, or divide a file at all the track mark positions.
• You cannot format the memory or erase all the files in a folder
because of insufficient battery power. Replace the old LR03 (size
AAA) alkaline battery with a new one. Or charge the rechargeable
battery (page 12) or replace the old rechargeable battery with a
new one.