Tips For Optimal Tea Brewing; Preparing The Tea Maker For Use - Breville the Tea Maker BTM800 Manual

Hide thumbs Also See for the Tea Maker BTM800:
Table of Contents

Advertisement

TIPS FOR OPTIMAL TEA BREWING

Water quality affects taste. For best
results, use filtered water.
Finer tea particles and leaves will infuse
more quickly than whole leaves. As a
result, finer tea particles often release
too much tannin too quickly, creating a
harsher taste. Adjust the brewing time
until desired strength is achieved.
Using the tea scoop provided, spoon
roughly one scoop of tea per cup / 8oz /
250ml of water.
WATER TO TEA SCOOP RATIO
Glass Jug
Cups /
Marking
Ounces
500mL
Approx.
2 Cups / 16oz
750mL
Approx.
3 Cups / 24oz
1000mL
Approx.
4 Cups / 32oz
1200mL
Approx.
5 Cups / 40oz
PREPARING THE TEA MAKER FOR
USE
In order to remove any dust or protective
residues from the manufacturing process, it
is recommended to run a boiling cycle then
discard the water.
1. Remove and safely discard any
packing material, promotional labels
and tape from the Tea Maker.
2. Remove the Jug Lid then remove the
Tea Basket from the magnetic post
within the Glass Jug. Wash the Jug
Lid, Tea Basket, Basket Lid and Tea
Scoop in warm soapy water with a soft
sponge, rinse and dry thoroughly.
Never immerse the BASE OF THE GLASS
JUG, POWER BASE, POWER CORD or
POWER PLUG in water or allow moisture
to come in contact with these parts
3. Place the Power Base on a flat,
4. Without the Tea Basket in place, fill the
Tea
Scoops
Never fill the glass jug with chilled water.
Allow the tea maker to cool before refilling.
2 Scoops
Filling past the 'MAX' line may result in
serious burns or injuries as a result of
3 Scoops
overflowing hot or boiling water. Filling
below the 'MIN' line will result in the tea
maker switching off before the water has
4 Scoops
boiled or reached the selected temperature
5. Unwind the power cord completely and
5 Scoops
6. The LCD screen will illuminate with
7. Press the left
WARNING
dry surface.
Glass Jug to the water maximum mark
(1500mL WATER MAX) and place on
the Power Base. Securely fit the Jug Lid
onto the Glass Jug.
WARNING
insert the power plug into a grounded
wall outlet.
the default brew temperature and brew
time display.
ARROW UP button
until the LCD screen displays
212°F. The 'Custom' LED will
automatically illuminate.
13

Advertisement

Table of Contents
loading

Table of Contents