Configuring The Mc9000 For The Modem - Motorola MDM9000 Quick Reference Manual

6
Connecting to the Single-Slot Serial Cradle
To connect the modem to the MC9000 Single-Slot Serial Cradle:
Connect the adapter cable to the serial port on the cradle.
1.
Connect the male 15-pin connector on the modem cable to the female 15-pin
2.
port on the adapter cable.
CAUTION
Connect one end of the phone cord to the Line In port on modem, and the
3.
other end to a wall phone jack.
If using a phone, connect the cord from the phone to the Phone port on the
4.
modem.
TNV Access
Before opening the unit for servicing, disconnect the Telecommunications
Network Voltage (TNV).

Configuring the MC9000 for the Modem

See the mobile computer's Product Reference Guide for information on modem
configuration.
Do not connect the modem's 15-pin connector into a VGA
port of a host computer.
MDM9000 Modem