Table of Contents
Advertisement
Mounting Bracket Kit
Mounting Bracket Kit
Use the mounting bracket kit if you require a Cisco mounting bracket. The mounting bracket attaches to the
mounting plate, and then the router is installed on the mounting bracket.
You can also use any compatible mounting bracket with the Cisco pole mount kit. Check with your authorized
Cisco reseller for compatible mounting brackets. See
Figure 2: Mounting Bracket Kit Contents Required Parts
Item
1
Included Hardware
2
3
4
5
Band Strap Kit
Use the straps in the band strap kit when you mount the router on a pole larger than 4.5 inches (11.4 cm) in
diameter. This installation also requires the pole mount kit and strap tool kit. See
2
and
Mounting the Router
4
Name
Mounting bracket
Washer (M8)
Split lock washer (M8)
Bolt (M8 x 1.25)
Serrated nut (M8 x 1.25)
Strap Tool Kit, on page
5.
Pole Mount Kit, on page
Qty.
Description
1
Mounts router to the mounting plate or wall.
12
Use the hardware specified in the figure above (items
2 through 5) to attach the mounting bracket to the
12
mounting plate, and the router to the mounting
bracket. Assemble the washer, split-lock washer, and
12
bolt as described in
page
12.
Use the nut to align the mounting bracket to the pole
1
bracket when pole bracket is being used.
Mounting the Router
2.
Assemble Bracket Hardware, on
Pole Mount Kit, on page
Advertisement
Table of Contents
