Sony CMT-LX30IR Operating Instructions Manual page 21

Folder and file generation rules
When first transferring music to a USB
device, a "MUSIC" folder is created
directly below the "ROOT. "
Folders and files are generated within this
"MUSIC" folder as follows.
CD SYNC
1)
Music Folder name
source
MP3 Same as the music source
CD-DA "CDDA001"
REC1
Music Folder name
source
MP3
"REC1"
CD-DA
In Program Play mode, the folder name is
1)
"PGM_xxx, " and the file name depends on
the music source (CD-DA disc or MP3 disc).
Up to 64 characters of the name are assigned.
2)
Folder numbers are assigned serially
3)
thereafter up to the maximum 999 (including
the "ROOT" and "MUSIC" folders).
File numbers are assigned serially thereafter.
4)
A new file is created in the "REC1" folder
5)
each time REC1 is performed.
File name
2)
"TRACK001"
3) 4)
File name
Same as the
5)
music source
2)
"TRACK001"
4)
Notes
 When transferring music from a CD, the
tracks are transferred as 128 kbps MP3 files.
When transferring music from an MP3 disc,
MP3 files are transferred with the same bit
rate as the original MP3 files.
 If you start transferring in shuffle play
mode, repeat play mode or in program play
mode (when no tracks or MP3 files are
programmed), the selected play mode is
automatically cancelled and the play mode
switches to normal play mode.
 While transferring music from an MP3 disc,
no sound is output and "HIGH-SPEED"
appears.
 CD text information is not transferred in the
created MP3 files.
 If you cancel the transfer partway, an MP3
file is created up to the point when the
transfer was stopped.
 Transferring stops automatically if:
 the USB device runs out of space during
the transfer process.
 the number of audio files on the USB
device reaches the limit for the number
that the system can recognize.
 If the folder to be erased contains non-MP3/
WMA/AAC format files or sub folders, these
are not erased.
 If a folder or file that you are trying to
transfer already exists on the USB device
with the same name, a sequential number is
added after the name without overwriting the
original folder or file.
1
GB