Before Using The Usb Device With This System - Sony CMT-LX30IR Operating Instructions Manual

To use the system as a battery charger
You can use the system as a battery
charger for the iPod when the system
is on.
The charging begins when the iPod
is placed on the unit's connector. The
charging status appears in the iPod
display. For details, see the user's guide of
your iPod.
To stop charging the iPod
Remove the iPod.
Notes
 When placing or removing the iPod, handle
the iPod in the same angle as that of the iPod
connector on the unit and do not twist or
sway the iPod to prevent connector damage.
 Do not carry the unit with an iPod set
on the connector. Doing so may cause a
malfunction.
 When placing or removing the iPod, brace
the unit with one hand and take care not to
press the controls of the iPod by mistake.
 Before disconnecting the iPod, pause
playback.
 To change the volume level, use VOLUME
+/. The volume level does not change even
if adjusted on the iPod.
 The iPod Dock on the unit is designed for
iPod only. You cannot connect any other
portable audio players.
 To use an iPod, refer to the user's guide of
your iPod.
 Sony cannot accept responsibility in the event
that data recorded to iPod is lost or damaged
when using an iPod with this system.
Before using the USB
device with this system
Check the websites below for the
information about compatible USB
devices.
For customers in the U.S.A.:
<http://www.sony.com/shelfsupport>
For customers in Canada:
English <http://www.sony.ca/
ElectronicsSupport/>
French <http://fr.sony.ca/
ElectronicsSupport/>
For customers in Europe:
<http://support.sony-europe.com/>
For customers in Latin America:
<http://www.sony-latin.com/index.crp>
For customers in Asia and Oceania:
<http://www.sony-asia.com/support>
Notes
 When USB cable connection is necessary,
connect the USB cable supplied with the USB
device to be connected. See the operation
manual supplied with the USB device to
be connected for details on the operation
method.
 It may take about 10 seconds before
"READING" appears depending on the type
of USB device connected.
 Do not remove the USB device during
transfer or erase operations. Doing so may
corrupt the data on the USB device or
damage the USB device itself.
 Do not connect the system and the USB
device through a USB hub.
 When the USB device is inserted, the system
reads all the files on the USB device. If there
are many folders or files on the USB device,
it may take a long time to finish reading the
USB device.

Continued
1
GB